2022 Sea Value

To Our Valued Customers: Prices are subject to change without notice KEY: Blue Item # =New | Red Item # =Hazardous | vOversize | 117 Plumbing Item# Special Rule_HalfVert* NaN Item# GPH Hose Volts Amps Special 29-24DAw 360 3/4" 12 2.1 29.99 EA 29-25DAw 500 3/4" 12 1.6 36.99 EA 29-20DAw 800 3/4" 12 3.4 59.99 EA 29-27DAw 1100 1" & 1 1/8" 12 3.7 64.99 EA Our pumps are tested to the highest standard, resulting in higher flow with better efficiency. •  Higher Flow optimized impeller to provide greater flow at the same amperage •  Built-in Thermal Cut-Off (TCO) •  Back Flow Prevention reduces the amount of water left over in the bilge •  Hidden Air Vents in the Body helps prevent air locking •  Threaded Discharge for easier installation & maintenance SUBMERSIBLE BILGE PUMPS Item# Description GPH Volts Special 29-LP900Su Fully automatic pump 900 12 94.99 EA A low profile pump designed for tight spaces at only 2-1/4" high. It features a threaded discharge nozzle to attach either the included straight or 90° fitting. It also iincludes a tricuspid check valve for the straight fitting to minimize back flow. The entire discharge body swivels up to 180° for ease of installation. The hose also swivels 360° for better routing. Two automated settings to turn on when LOPRO™ BILGE PUMP Item# GPH Hose Volts Amps Special 29-RM500Bu 500 3/4" 12 1.8 88.99 EA 29-RM800Bu 800 3/4" 12 3.0 113.99 EA 29-RM1100Bu 1100 1 1/8" 12 3.8 151.99 EA The eco-friendly Rule Mate pumps feature a solid state water sensing technology to eliminate a separate float switch. The sensor's unique "field effect" technology is ecofriendly because straight motor oil in the bilge will not turn on the pump. Includes a straight hose fitting, a snap-on strainer for easy cleaning and an anti-fouling impeller. 3-Year limited warranty. RULE-MATE™ AUTOMATIC BILGE PUMP Back View Item# GPH Hose Volts Amps Special 29-25SAw 500 3/4" 12 1.9 94.99 EA 29-27SAw 1100 1" & 1 1/8" 12 3.3 142.99 EA Ignition protected, submersible, double insulated motor runs cooler and can run dry. Double strainer non-clogging protection. Compact, efficient and maintenance free. Moisture tight PTFE seals. Silent running, vibrationless w/anti-airlock feature. Heat resistant housing with a 5/16" stainless shaft and a nylon/fiberglass impeller. ROUND AUTOMATIC BILGE PUMPS RuleMate Automatic Bilge Pump The Next Generation of RuleMate Bilge Pumps • Automatic water level sensing • 500, 800, 1100 GPH (10% higher flow) • All models supplied with back flow prevention • Built in thermal cut out to protect pump and vessel • Anti-airlock protection • RuleMate models feature a safety back-up operating mode NEW Item# GPH Hose Volts Fuse Size 29-RM500B 500 3/4” 12 4A 29-RM800B 800 3/4” 12 5A 29-RM1100B 1100 1” & 1 1/8” 12 7.5A Visit our website xylem.com/rule © 2019 Xylem Inc. Rule is a trademark of Xylem, Inc. or one of its subsidiaries. Item# Description GPH Hose Volts Amps Special 29-02v Standard Series 1500 1 1/8" 12 4.8 122.99 EA 29-10u Standard Series 2000 1 1/8" 12 8.4 171.99 EA Designed for the toughest applications. Designed to produce the highest capacity available for a pump its size. HIGH CAPACITY MANUAL BILGE PUMPS 2000 GPH Std 1500 GPH Std the water reaches either 1" or 1-3/4". In addition, the electronic automatic mode allows the pump to check for water every 2-1/2 minutes. If water is detected, the pump stays on until the water is removed. If no water is detected, then the pump turns off.

RkJQdWJsaXNoZXIy MTI2MTky